Explore our high-performance wear-resistant polymer series. Engineered to withstand intense structural loads, reduce drag, and maximize operational throughput.
In the modern era of high-speed manufacturing and heavy logistics, **extruded plastic strips and guide profiles** serve as critical tribological elements. The efficiency of a conveyor network, mining system, or semiconductor sorting machine depends on minimizing slide resistance. Tianjin Beyond Technology Development Co., Ltd., a pioneering China-based factory, produces industrial-grade wear strips designed to counter dry-running sliding friction and structural fatigue.
Traditional metallic guide rails suffer from heavy mass, oxidative corrosion, and the strict requirement for constant external lubrication. Our custom extrusion techniques utilizing Ultra-High Molecular Weight Polyethylene (UHMW-PE PE1000) and Acetal (POM) offer a self-lubricating alternative that increases efficiency, lowers power usage, and eliminates grease contamination.
By aligning molecular weight chains up to 9.2 million g/mol, our UHMW-PE extrusion strips achieve a friction coefficient of 0.12 against dry steel. This represents an 80% reduction in friction torque compared to non-lubricated steel-on-steel assemblies, allowing machinery to consume less power.
As industrial speeds rise, standard plastic wear strips face the limits of thermal degradation and structural creep. Tianjin Beyond's research and development focuses on creating composites that perform under higher pressures and velocities (known as the PV limit).
Integrating graphite particles, molybdenum disulfide (MoS2), and silicone oils directly into the polymer matrix. This maintains a low dynamic coefficient of friction even when dry-running at high speeds.
Our carbon-black and CNT (Carbon Nanotube) doped POM and UHMWPE compounds lower surface resistivity to a stable range of 106 to 109 ohms, protecting sensitive electronics on automated conveyor tracks.
Under our RG1000 circular project, we mix industrial ocean-bound plastics and post-consumer polymers with virgin matrices. This delivers sustainable components with minimal loss in structural performance.
| Polymer Type | Dynamic COF (Dry vs Steel) | Tensile Strength (MPa) | Max Continuous Temp (°C) | Primary Application Fields |
|---|---|---|---|---|
| UHMWPE (PE1000) | 0.10 - 0.15 | 22 - 28 | 80 | Mining chutes, wear-strips, chain guides, harbor fenders |
| HDPE (PE300/500) | 0.20 - 0.25 | 20 - 25 | 75 | Food preparation tables, water tanks, ground protection mats |
| POM (Polyacetal/Delrin) | 0.15 - 0.20 | 65 - 70 | 100 | Precision gears, structural bushings, electronics carrier clips |
| Nylon 6 / PA66 | 0.25 - 0.35 | 75 - 85 | 110 | Heavy pulleys, cast gears, wear plates, aerospace buffers |
| PTFE (Teflon) | 0.04 - 0.08 | 20 - 35 | 260 | High-temperature seals, chemical sliders, valve linings |
Modern packaging distribution lines run continuously. Unprotected steel frames suffer fast wear and create noise. Our custom-extruded UHMWPE guide rail covers and wear strips snap over metal support frames, reducing system noise and extending belt life.
Abrasive minerals quickly damage steel truck beds and hoppers. Installing our UHMWPE liner sheets protects the base metal and prevents wet material from sticking. This keeps materials flowing smoothly and cuts maintenance shutdowns.
Harsh marine conditions degrade standard materials. Our high-impact UHMWPE marine fender pads absorb dock impacts while resisting salt water, UV rays, and ice, protecting both ship hulls and concrete docks.
Tianjin Beyond Technology Development Co., Ltd. is a comprehensive manufacturing enterprise specializing in engineering plastic materials and precision CNC machining. Since 2015, the company has gained more than ten years of practical experience in engineering plastics manufacturing and precision CNC machining, building strong and reliable capabilities in material processing, precision control, and industrial production.
Our manufacturing base spans approximately 50,000 square meters and integrates compression molding and extrusion workshops, a precision CNC machining center, and a dedicated R&D facility. Outfitted with advanced international equipment—including compression molding and extrusion lines, gantry CNC lathes, gantry CNC milling machines, and large-scale CNC engraving systems—this integrated setup allows us to maintain consistent quality, run efficient production, and deliver high-precision, large-volume, and customized products that meet the highest industrial standards.
We focus on the manufacturing of UHMWPE, HDPE, PP, and PVC sheets and rods, as well as a wide range of custom non-standard engineering plastic components and precision metal CNC machined parts, providing flexible and application-oriented solutions for diverse industrial requirements.
Premium products come from high-quality raw materials. Tianjin Beyond has developed reliable partnerships with major global material suppliers. We purchase raw materials from leading companies like TICONA, LG, and Sinopec. Our independent laboratory runs testing on incoming molecular chains to verify density, molecular weight, and impact resistance before manufacturing begins.
Ya’an Times Biotech Co., Ltd. is located in Ya’an, Sichuan, where the altitude varies greatly from 525 meters to 7555 meters. The diverse landforms and ambient temperatures provide a proper growth environment for a large number of plants which are main sources of high-quality pure natural raw materials of our products.
The raw material oils used in the production of essential oils, food and cosmetics are the second largest category of our products, such as camellia oil, eucalyptus oil, turmeric oil and pepper oil, etc. Times Biotech selects high-quality raw materials with high standards, strictly controls and supervises the whole production and extraction process, and adopts strict inspection standards to guarantee our oils to be the premium raw material oils which can be your best choice for your products.
Tianjin Beyond operates under strict quality management frameworks. Our products are fully traceable, and our manufacturing facilities undergo routine audits by third-party verification agencies.
We maintain an independent laboratory and R&D team, staffed by experienced materials engineers, technical engineers, production leads, and engineering plastics specialists. We cooperate with universities and research institutions to develop custom polymers. Our operations are certified under ISO 9001, SGS, and BV, ensuring consistent and dependable products.
Whether you need food-grade compliance (FDA) for cutting boards, or anti-static (ESD) documentation for POM sheets, we provide complete Certificates of Analysis (COA) and material properties documentation with every shipment.
Tianjin Beyond Technology Development Co., Ltd. is committed to the core operating principle: “Quality + Speed + Service = Value”.
ISO 9001, SGS, BV certified facilities ensure consistent molecular density and dimensional control across production batches.
We supply durable, food-safe, and environmentally friendly plastics with excellent impact strength and self-lubricating properties.
Precision CNC routing, profile planning, milling, and lathe work. We fabricate custom wear strips, gears, and guides to your exact specifications.
We handle everything from initial raw material selection to extrusion, custom machining, final inspection, and global delivery.
We maintain large stocks of standard sheets, rods, and profiles in our warehouse, allowing us to offer quick turnaround times on bulk orders.
Our UHMWPE sheets offer excellent wear and impact resistance, making them ideal for high-wear areas like conveyors, hoppers, and guide rails.
Enquire Now
Highly abrasion-resistant, self-lubricating, and non-water-absorbent engineering sheets.
Enquire Now
A sustainable and cost-effective solution for industrial projects, reducing carbon emissions while maintaining strong wear resistance.
Enquire Now
A high-performance, versatile polymer formulated to replace heavier steel and aluminum parts, helping to reduce costs.
Enquire Now
Designed to withstand continuous sliding wear and metal-on-plastic friction. A reliable choice for chute linings and impact surfaces.
Enquire NowExtruded wear strips are manufactured in continuous profiles, ensuring consistent dimensions and making them ideal for long conveyor lengths. This process is efficient and cost-effective for high-volume orders. Compression-molded strips, on the other hand, are machined from pressed plates. This method is better suited for ultra-high molecular weights (over 9.2 million g/mol) and thick parts, as it produces less internal stress.
We compound conductive carbon black or permanent anti-static additives directly into the raw polymer matrix prior to processing. This ensures the ESD protection is active throughout the entire material, rather than just on the surface. The electrical resistivity stays stable at 106 to 109 ohms, even after wear and repeated cleaning.
Yes. Using our multi-axis CNC gantry milling machines, we can supply wear strips custom-machined with counter-bored holes, slots, chamfers, or interlocking joints according to your design drawings. This allows for direct installation out of the box.
UHMW-PE has a thermal expansion coefficient of approximately 1.5 to 2.0 x 10-4 m/(m·K). This is higher than metals, so we recommend using slotted mounting holes or expansion gaps of 3-5mm per meter. This allows the material to expand and contract freely without warping during temperature changes.
Our RG1000 recycled sheets offer a more sustainable and cost-effective option for non-critical industrial wear applications. They retain about 80-85% of the tensile and impact strength of virgin PE1000. However, for direct food contact or highly critical chemical environments, we recommend using our virgin PE1000 materials.
Our natural-color UHMWPE and HDPE sheets are manufactured using FDA-compliant raw materials, making them safe for direct food contact. We provide testing documentation showing compliance with FDA 21 CFR 177.1520 regulations for use in food processing equipment.
Standard extruded profiles are typically supplied in lengths of 3 to 6 meters. However, we can accommodate custom length requirements based on container dimensions or project specifications, helping to reduce the number of joints needed during installation.
PA6 Nylon is hygroscopic and can absorb up to 3% water by weight, which can cause dimensional expansion and a slight drop in tensile strength. POM Delrin absorbs very little moisture (under 0.2%), making it a more suitable choice for high-humidity or submerged applications where precise dimensions are critical.
Explore our range of heavy-duty liners, structural rods, and custom-machined plastic components designed for high-stress applications.
Our facility processes a wide range of standard and custom shapes, including rods, sheets, and profiles in various engineering plastics:
Heavy Equipment Road Mat Ground Protection Mat HDPE Temporary Roads
1mm - 200mm Gray Color Engineering Plastics Polypropylene PP Sheets
Blue PA6 Sheets, Custom Cast MC Nylon66 Parts, Solid PA6 Round Rods
HDPE Sandwich 3-Layer Double Color Sheets for Playground Equipment
15mm, 20mm, 200mm White Delrin POM Sheets & Custom CNC Machining
Beyond